This lithium wafer cell either solders directly to board or plugs into a socket. by Voltage 3.6

This lithium wafer cell either solders directly to board or plugs into a socket.

High energy, high reliability 3.6 volt power source.

Excellent memory backup power source.

Low self discharge rate gives this cell a 10 year shelf life.

Stable voltage and temperature range (-60? to +85?C).

Lithium wafer cell solders to board or plugs into a socket. by Voltage 3.6

Lithium wafer cell solders to board or plugs into a socket.

High energy, high reliability 3.6 volt power source.

Excellent memory backup power source.

Low self discharge rate gives this cell a 10 year shelf life.

Stable voltage and broad temperature range (-55? to +85?C).

Lithium wafer cell solders to board or plugs into a socket. by Voltage 3.6

Lithium wafer cell solders to board or plugs into a socket.

High energy, high reliability 3.6 volt power source.

Excellent memory backup power source.

Low self discharge rate gives this cell a 10 year shelf life.

Stable voltage and broad temperature range (-55? to +85?C).

This single cell lithium clock battery is designed as an exact replacement for most Toshiba brand desktops. by Voltage 3.6

This single cell lithium clock battery is designed as an exact replacement for most Toshiba brand desktops.

This item has 10.5 inch wires, 3 pin connector and velcro mount.

Maintains clock and configuration memory while machine is turned off.

This ENERGY+ item is assembled in the U.S.A. by American workers.

ENERGY+ Lithium Memory Battery by Voltage 3.6

ENERGY+ Lithium Memory Battery

Single cell lithium battery replaces 3.6 volt PC/AT batteries.

This battery requires a motherboard installed blocking diode. If you are not sure your motherboard has a blocking diode call us for best choice.

Has 10.5 inch wires, 4 pin connector and velcro mount.

Keeps clock and configuration memory when machine's off.

This 2 cell lithium clock for IBM PC/XT and IBM PS/2 50, 60, 70, 80, 85 machines. Contains a diode and resistor to insure safety and long life. Has button contacts. by Voltage 6.0

This 2 cell lithium clock for IBM PC/XT and IBM PS/2 50, 60, 70, 80, 85 machines. Contains a diode and resistor to insure safety and long life. Has button contacts.

Maintains clock and configuration memory while machine is turned off.

This ENERGY+ item is assembled in the U.S.A. by American workers.

by Voltage 3.0

Combination clock and configuration memory chip with internal battery. Direct replacement for Dalla DS12887 24 pin IC chip.

by Voltage 3.0

Combination clock and configuration memory chip with internal battery. Direct replacement for Dallas DS1287 24 pin IC chip.

This 2 cell lithium clock battery is an exact replacement for most older model Epson Equity series computers. by Voltage 6.0

This 2 cell lithium clock battery is an exact replacement for most older model Epson Equity series computers.

This item has 3 inch wire leads to 2 pin connector.

Maintains clock and configuration memory while machine is turned off.

This ENERGY+ item is assembled in the U.S.A. by American workers.

by Voltage 6.0

This 2 cell PC/AT battery is rated 6.0 volts and has a resistor for charge protection, 6.0 inch wires, 4 pin connector and velcro mount.

This item has 10.5 inch wires, 4 pin connector and velcro mount.

Maintains clock and configuration memory while machine is turned off.

by Voltage 7.2

Long life PC/AT clock battery contains a diode and resistor which prevents charging and controls voltage to the clock and configuration memory. The best choice if your motherboard has an external battery connector.

This item has 10.5 inch wires, 4 pin connector and velcro mount.

Maintains clock and configuration memory while machine is turned off.

This ENERGY+ item is assembled in the U.S.A. by American workers.

Long life PC/AT battery with smaller physical dimensions for applications where space is limited. by Voltage 7.2

Long life PC/AT battery with smaller physical dimensions for applications where space is limited.

this item has 8.5 inch wires, 4 pin connector and velcro mount.

Maintains clock and configuration memory while machine is turned off.

This ENERGY+ item is assembled in the U.S.A. by American workers.